Have you gone to start your car in the morning only to realize it’s dead? There’s nothing worse than your vehicle becoming an obstacle in your morning routine. If your car won’t start, there’s a good chance you’ll need to jump-start your car battery. If you’ve already tried to jump-start your car and your car won’t jump-start, it’s possible that you’ll need to call a jump-start car service.
Are you trying to figure out the proper way to jump-start your car in New Milford? Are you curious how to properly jump-start a car for the first time? No matter what the case may be, this guide is for you! We look forward to helping you get back out onto the Trumbull roads! You can connect with the service center team at Todd Maserati of Danbury for a diagnosis if the issues persist, and be sure to explore our service specials for chances to save with your next appointment.
The Proper Way to Jump-Start a Car
Do you know the proper way to jump-start a car? Fortunately, the process is quite simple. However, you will need another person and another vehicle for this, as well as a set of jumper cables. If any of this is not available, we recommend contacting a jump-start car service for assistance on the proper way to jump-start a car. If you have everything you need, here’s how to get started.
- Arrange the two vehicles with the batteries facing each other. Most vehicles have batteries in the engines, meaning they’ll usually face hood to hood. Some foreign cars, though, have the battery in the trunk. After you’ve parked the vehicles, turn them off and set the parking brakes.
- Gain access to the batteries. Note: you may need to remove a plastic hood to expose the battery terminals.
- Find the positive and negative battery terminals. Make sure they are clean and free of any corrosion or dirt.
- Take stock of your cables and separate the red ends from the black ends. You don’t want them to touch, ever, as they could spark. Next, connect the red clamp to the positive post on the dead battery.
- Uncoiling the battery cable, hook the other red clamp to the positive terminal of the battery with the charge.
- Connect the black clamp to the negative post on the good battery.
- Connect the last black clamp to a grounded, unpainted metal surface on your car’s frame.
- Once everything is hooked up securely, start the engine of the vehicle with the good battery. You may try to start the engine right away, but it’s probably a good idea to let the car with the good battery run for a bit, then try starting the engine of the other vehicle.
- Once the dead vehicle has been successfully jump-started, carefully remove the jumper cables in the reverse order that they were placed on, and keep the other vehicle running.
- Be sure to keep the engine running on the restarted vehicle for at least 10 minutes to ensure that the weak battery doesn’t die again right away. Consult your owner’s manual for more info on recommended times. It’s also recommended that you get your battery tested and/or replaced ASAP.
Note — if you don’t feel comfortable recruiting a stranger to help you and you’re in a new area alone, you may wish to just call a jump-start car service. Otherwise, it’s easy to learn how to jump-start a car:
Additional Car Battery Tips & Tricks
Your car won’t jump-start? If your vehicle doesn’t start, there could be reasons why a jump-start may not be successful. Here are just a few worth noting:
- If you try to start the car but only hear a clicking sound, the starter might not be functioning.
- If the electrical systems of the car turn on but the engine does not, then the issue could be a number of things including the ignition switch, starter, or even something as simple as a fuse. It’s worth bringing your vehicle to a qualified service center for further diagnostics and investigation.
- Don’t forget to keep your vehicle running for a while after it has received a jump. That allows the battery to recharge some after it’s been completely drained. Note that some batteries still can hold a charge for some time after being jumped; usually, this is the case after a vehicle with a good/newer battery has been sitting idle. A remedy to prevent this is using a battery trickle charger. Sometimes, though, an old and worn-out battery that requires replacing is the reason for a car needing a jump.
Turn to Todd Maserati of Danbury for More DIY Car Care Tips
We’re here to help you get back on the roads of Stamford as quickly as possible. Schedule service with us for repairs, or get in touch with a local jump-start car service team in Danbury to inspect your vehicle. Feel free to contact us for assistance. You can explore more service tips for additional information on how to jump-start a car and what to do when your car won’t jump-start.
